Z-Wave Smart Dimmer Switch with Scene Switches - 2 Circuits - Polished Chrome

Our Z-Wave Smart Dimmer Switch with Scene Switches is the ideal solution for installing smart lighting control that also complements your decor. We believe we are currently the only company to offer UK customers Z-Wave Smart Dimmer Switches in a range of decorative finishes!

Firstly they work on the hugely popular Z-Wave protocol meaning they will work with thousands of Z-Wave vendors' equipment. Secondly, the dimming capability built into the device is so advanced it actually analyses the type of light bulb(s) connected to it and automatically calibrates its settings for optimal performance, resulting in one of the most universally compatible lighting dimmers in the world!

There are four switches on this version, two are for controlling the attached lighting circuits whilst the other two are free to be programmed* to control other devices or activate scenes and automations.  Allowing you a quick single button access to your favourite devices or automations.

Last but certainly not least, they work on what is called '2 wire' systems. Many 'smart' dimmer switches often need a neutral wire (the blue one) for them to operate but here in the UK we vary rarely have a neutral wire in our switch boxes because we simply use the light switch to "break" the live wire of the lighting circuit to make the light go off or on - but our Z-Wave Smart Dimmer Switch will work with almost any lighting circuit wiring!

If you can't find what you are looking for, need further information or even a bespoke request then please Contact Us and we will do our utmost to help you.

Please allow 3-5 working days from order to dispatch.

*Compatible central controller gateway required

Our Z-Wave Smart Dimmer Switch with Scene Switches is available in at least 8 different colours/finishes and is not your typical light switch. The button you press is called a 'momentary switch', which is just like a 'door bell' push button. We use this type of switch because it offers the most functionality from the dimmer system. With one press of the switch you can turn your lighting circuit on or off. To dim or brighten your lights you simply press and hold the switch. This would be almost impossible and very very difficult to do with an ordinary light switch!

Each Z-Wave Smart Dimmer Switch with Scene Switch can handle lighting loads up to 250w per circuit (this is the total wattage of all light bulbs connected to the lighting circuit) and works with both filament and LED bulbs.

This 2 circuit Z-Wave Smart Dimmer Switch with Scene Switches can control a single lighting circuits either directly using the switch or via the central controller for remote, App & scene based automation.

We have many configurations, browse the range here: Pre-Wired Products

For an even easier experience our Pre-Configuration Service will set up your entire system and dispatch it to you ready for a simple installation. All your devices will be configured ready to use once installed.

Our Z-Wave Smart Dimmer Switch with Scene Switches comes ready wired up for easy and fast installation. It includes toolless clip connectors for super fast, hassle free connection to your existing wiring - in fact we believe it is easier and faster to install than a regular light switch.

Please note, our Z-Wave Smart Dimmer Switch with Scene Switch needs at least 35mm of depth, so if needed we also sell extra deep back boxes and back box extenders for when your existing ones aren't deep enough.

The installation of this product and all similar electrical items must be installed compliant with British Standard BS7671.  If you are unsure in any way then you must consult and use a certified electrical contractor.  Approved Contractors may be found here: NICEIC

Purchase any 5 items, receive 5% off!

Purchase any 10 items, receive 10% off!

Available across all of our products!* 

*Exclusions may apply.