- Easy to Use
Our Z-Wave enabled Dimmable Smart Switch is the ideal solution for installing smart lighting control that also complements your decor. We believe we are currently the only company to offer UK customers Z-Wave enabled smart switches in a range of decorative finishes!
If you can't find what you are looking for, need further information or even a bespoke request then please Contact Us and we will do our utmost to help you.
Please allow 3-5 working days from order to dispatch.
Please note: this product is excluded from our refund policy as it is a bespoke item. This does not affect your statutory rights.
Our dimmable smart switches are powered using FIBARO's Z-Wave based 'Dimmer 2' modules, which in our experience are simply the best. Firstly they work on the hugely popular Z-Wave protocol meaning they will work with thousands of Z-Wave vendors' equipment. Secondly, the dimming capability that FIBARO built into their device is so advanced it actually analyses the type of light bulb(s) connected to it and automatically calibrates its settings for optimal performance, resulting in one of the most universally compatible lighting dimmers in the world! Last but certainly not least, they work on what is called '2 wire' systems. Many 'smart' dimmer switches often need a neutral wire (the blue one) for them to operate but here in the UK we vary rarely have a neutral wire in our switch boxes because we simply use the light switch to "break" the live wire of the lighting circuit to make the light go off or on - but FIBARO's Dimmer 2 module works with almost any lighting circuit wiring!
Our Z-Wave enabled Dimmable Smart Switch is available in at least 8 different colours/finishes and is not your typical light switch. The button you press is called a 'momentary switch', which is just like a 'door bell' push button. We use this type of switch because it offers the most functionality from the dimmer system. With one press of the switch you can turn your lighting circuit on or off. To dim or brighten your lights you simply press and hold the switch. This would be almost impossible and very very difficult to do with an ordinary light switch!
Each Z-Wave enabled Dimmable Smart Switch can handle lighting loads up to 250w (this is the total wattage of all light bulbs connected to the lighting circuit) and works with both filament and LED bulbs.
This 1 channel Z-Wave enabled Dimmable Smart Switch can control a single lighting circuit either directly using the switch or via the central controller for remote, App & scene based automation.
We have many configurations, browse the range here: Pre-Wired Products
For an even easier experience our Pre-Configuration Service will set up your entire system and dispatch it to you ready for a simple installation. All your devices will be configured ready to use once installed.
Our Z-Wave enabled Dimmable Smart Switch comes ready wired up for easy and fast installation. It includes toolless clip connectors for super fast, hassle free connection to your existing wiring - in fact we believe it is easier and faster to install than a regular light switch.
Please note, our Z-Wave enabled Dimmable Smart Switch needs at least 35mm of depth, so if needed we also sell extra deep back boxes and back box extenders for when your existing ones aren't deep enough.
The installation of this product and all similar electrical items must be installed compliant with British Standard BS7671. If you are unsure in any way then you must consult and use a certified electrical contractor. Approved Contractors may be found here: NICEIC