FIBARO Roller Shutter 3 is a device designed to control roller blinds, awnings, venetian blinds, gates and other single phase, AC powered devices.
Roller Shutter 3 allows precise positioning of roller blinds or venetian blind lamellas. The device is equipped with power and energy monitoring. It allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.
Features
Compatible with any Z-Wave or Z-Wave+ Controller,
Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption,
To be installed with roller blind motors with electronic or mechanical limit switches,
Advanced microprocessor control,
Active power and energy metering functionality,
Works with various types of switches – momentary, toggle and dedicated roller blind switches,
To be installed in wall switch boxes.
Specifications
Power supply:
100-240V~ 50/60 Hz
Rated load current:
4.2A for lamps and resistive loads 1.7A for motors with compensated power factor (inductive loads)
Supported motor type:
single-phase AC motors
Required limit switches:
electronic and mechanic
Power consumption:
up to 0.8W
Operating temperature:
0-35°C
Active element:
micro-gap relay switch μ
For installation in boxes:
Ø ≥ 50mm, depth ≥ 60mm
Radio protocol:
Z-Wave (500 series chip)
Radio signal power:
EIRP up to 6dBm
Radio frequency:
868.4 or 869.8 Mhz EU 908.4 or 916.0 Mhz US 921.4 or 919.8 Mhz ANZ 869.0 Mhz RU
Range:
up to 50 m outdoors up to 30 m indoors (depending on building materials)
