Z-Wave UK Dimmer Socket - 2 Gang - 1 Dimmable & 1 Standard - Georgian Brass

Our Z-Wave UK Dimmer Socket is the ideal solution for creating smart mood & scene lighting with your floor and table lamps without compromising your decor!  One socket of the Z-Wave UK Dimmer Socket can be controlled for smart dimming, while the other operates as a standard socket. They can simply be installed instead of regular sockets to upgrade to smart functionality!

If you can't find what you are looking for, need further information or even a bespoke request then please Contact Us and we will do our utmost to help you.

Please allow 3-5 working days from order to dispatch.

Please note: this product is excluded from our refund policy as it is a bespoke item.  This does not affect your statutory rights.

Our Z-Wave UK Dimmer Socket works on the hugely popular Z-Wave protocol meaning they will work with thousands of Z-Wave vendors' equipment.  Secondly, the dimming capability built into the device is so advanced it analyses the type of light bulb(s) connected to it and automatically calibrates its settings for optimal performance, resulting in one of the most universally compatible lighting dimmers in the world!   Since they work on the hugely popular Z-Wave protocol they will work with thousands of Z-Wave vendors' equipment, whilst also measuring & recording their power usage.

Each Z-Wave UK Dimmer Socket can handle lighting loads up to 250w and works with both filament and LED bulbs.  The dimming circuitry is both leading & trailing edge for maximum compatibility.

For an even easier experience our FIBARO SYSTEM SETUP & PROGRAMMING SERVICE will set up your entire system and dispatch it to you ready for a simple installation.  All your devices will be configured ready to use once installed.

Our Z-Wave UK Dimmer Socket comes ready wired up for easy and fast installation.  It includes toolless clip connectors for super-fast, hassle-free connection to your existing wiring - in fact we believe it is easier and faster to install than a regular wall socket.

Please note, our Z-Wave UK Dimmer Socket needs at least 35mm of depth, so if needed we also sell extra deep back boxes and back box extenders for when your existing ones aren't deep enough.

The installation of this product and all similar electrical items must be installed compliant with British Standard BS7671.  If you are unsure in any way then you must consult and use a certified electrical contractor.  Approved Contractors may be found here: NICEIC

Purchase any 5 items, receive 5% off!

Purchase any 10 items, receive 10% off!

Available across all of our products!* 

*Exclusions may apply.