- Multi-buy Discount
FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
Compatible with any Z-Wave or Z-Wave+ Controller
Supports protected mode (Z-Wave network security mode) with AES-128 encryption
Advanced microprocessor control
Active power and energy metering functionality
Works with various types of switches – momentary, toggle
To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations
|Power supply:||100-240V~ 50/60 Hz|
|Rated load current:||
Single Switch 2 (FGS-213):
IEC standards: 8A
UL standards (resistive load): 6.5A
UL standards (incandescent load): 5A
|For installation in boxes:||Ø ≥ 50mm, depth ≥ 60mm|
|Radio protocol:||Z-Wave (500 series chip)|
|Radio signal power:||up to 1mW|
|Radio frequency:||868.4 or 869.8 MHz EU;
908.4, 908.42 or 916.0 MHz US;
921.4 or 919.8 MHz ANZ;
869.0 MHz RU;
|Radio transmit power:||up to 6 dBm (EIRP)|
|Range:||up to 50m outdoors
up to 40m indoors
(depending on terrain and building structure)
|Comply with EU directives:||RED 2014/53/EU
|Dimensions (L x W x H):||42.5 x 38.25 x 20.3 mm|
Purchase any 5 items, receive 5% off!
Purchase any 10 items, receive 10% off!
Available across all of our products!*
*Exclusions may apply.