FIBARO RGBW Controller is a universal, Z-Wave compatible RGB/RGBW controller. FIBARO RGBW Controller uses PWM output signal, which enables it to control LED, RGB, RGBW strips, halogen lights and fans. Controlled devices may be powered by 12 or 24 VDC. In addition the device supports up to four, 0V – 10V analog sensors, such as temperature sensors, humidity sensors, wind sensors, air quality sensors, light sensors etc. All IN and OUT terminals may be user configured for LED control or 0V-10V signal readouts

The Fibaro RGBW Controller 2 4 channel lighting controller that is perfectly designed to control our RGBW LED strip lights enabling you to create almost any colour of light.

While most multi colour LED strip lights are just RGB (red, green & blue) this controller also handles a fourth channel which enables it to work perfectly with LED strip lights that also have a white LEDs.

Now you can have and control both white and coloured lighting all from a single device and single LED strip light.

When controlled through the Fibaro system, almost any colour can be created with the controller and LED Strip, so you can create awesome scenes for scenarios like parties, relaxation or even warnings like intrusion, leaks or fire.

Imagine a room being washed in blue light is a water leak is detected somewhere or red if a possible intrusion has occurred. Better still, you could create relaxing warm colours like golden sunsets if you're wanting to relax. All of this can be automated based on many different triggers, like activation of a sensor, time of day, etc.

Features

Compatible with any Z-Wave Controller
Advanced microprocessor control
Different operating modes
Active power and energy metering functionality
Multiple colour presets
Active element: transistor
To be installed in standard wall switch boxes

Specifications

Supported loads

FIBARO RGBW Controller may control:

12 / 24VDC powered RGB strips
12 / 24VDC powered RGBW strips
12 / 24VDC powered LED strips, bulbs, etc.
12 / 24VDC powered halogen lights
12 / 24VDC powered low output power fans

Additional features:

0-10V sensors signal readouts
0-10V potentiometer signal readouts, and managing outputs accordingly
controlled by momentary or toggle switches

Technical data

Power supply:	12/24V DC
Rated output power:	combined 12A (sum of all connected output channels) 6A for single output channel
PWM output frequency:	244Hz
Electricity consumption:	0.3W
Radio signal power:	1mW
For installation in boxes:	Ø≥50 mm
Max load:	at 12V – 144W combined at 24V – 288W combined
EU directive compliance:	RoHS 2011/65/EU EMC 2004/108/EC R&TTE 1999/5/EC
Radio protocol:	Z-Wave
Radio frequency:	868.4 MHz EU 908.4 MHz US 921.4 MHz ANZ 869.0 MHz RU
Radio transmit power:	up to -1 dBm (EIRP)
Range:	up to 50m outdoors / up to 30m indoors (depending on terrain and building structure)
Operational temperature:	0 – 40°C
Dimensions (L x W x H):	42 x 37 x 17 mm

Manuals

FIBARO RGBW Controller 2 Manual

Multi-buy Discount

Purchase any 5 items, receive 5% off!

Purchase any 10 items, receive 10% off!

Available across all of our products!*

*Exclusions may apply.

Lighting