- Manuals & Documentation
FIBARO CO Sensor is an ultra-light, compact, battery-powered carbon monoxide detector, designed to be placed on a wall.
Its high sensitivity allows detecting the presence of the carbon monoxide (CO) gas at the early stage to prevent carbon monoxide poisoning. The alarm is signaled with a built-in siren, blinking LED indicator and by sending commands to Z-Wave network devices.
Additionally, the device is equipped with a temperature sensor.
Because this is a FIBARO Z-Wave device it can be used to trigger other devices or scenes, so for example in a scenario where carbon monoxide (CO) is detected your system could be set up to flash lights, change LED Strip Lights to a red coloured light and of course send notifications to your mobile devices.
- Compatible with any Z-Wave or Z-Wave+ Controller
- Supports protected mode (Z-Wave network security mode) with AES-128 encryption
- Completely wireless
- Alarm signalled with a built-in siren and LED diode
- Built-in temperature sensor
|Power supply:||CR123A/CR17345 battery, 3.0V DC|
|Lifespan under typical conditions:||8 years|
|CO concentration measurement range:||0 – 450 ppm|
|Measuring accuracy:||±10ppm / ±5%|
|Operating temperature:||0 – 50°C|
|Operating humidity:||10-95%RH without condensation|
|Alarm siren sound level:||85 dBA at 3 meters (10 feet)|
Alarm response times on
|EU directives compliance:||
|Radio protocol:||Z-Wave (500 series chip)|
868.4, 868.42 or 869.8 MHz EU;
908.4, 908.42 or 916.0 MHz US;
921.4, 921.42 or 919.8 MHz ANZ;
869.0 or 869.02 MHz RU;
|Radio transmit power:||up to -5 dBm (EIRP)|
up to 50m outdoors
up to 40m indoors
(depending on terrain and building structure)
|Dimensions (diameter x height):||65 x 28 mm|
Click this link for the FIBARO CO Sensor Manual